Go Back   Cruiser Log World Cruising & Sailing Forums > Cruising Forums > General Cruising Forum
Cruiser Wiki Click Here to Login

Join Cruiser Log Today

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-15-2006, 04:41 PM   #1
Ensign
 
Join Date: Apr 2006
Posts: 15
Default Flexible Shaft Coupling

[?]The previous owner of my boat replaced the original mounts with solid mounts (these are being replaced with flexible mounts). It was found during the survey that at some stage the engine had worked loose on these mounts (coach bolts were too small!) As a result the shaft was out of alignment and the cutlass bearing needed replacing. The coach bolts were replaced as was the cutlass bearing and I was assured by the broker that the alignment was done properly before I took delivery of the boat. I have since found this not to be the case.

I find it impossible to align the shaft correctly. I suspect the shaft may have been slightly damaged as a result of the engine working loose. Unfortunately it is not feasible to lift the boat out of the water in order to remove the shaft (there are no lifting facilities close to my location). I am hoping a flexible shaft coupling would compensate for any intolerance (whip) until I can have the boat lifted. Is this a realistic expectation? Has anyone had a similar experience? If so what coupling did you use? (Hopefully one that is available in Oz)
__________________

__________________
zerubb is offline   Reply With Quote
Old 10-28-2006, 04:20 PM   #2
Commander
 
Join Date: Aug 2004
Posts: 104
Default

contact polyflex in Brisbane, they are made of flexable plastic but there are limits to how much flex they can compensate. Price is about 60% of a genuine Yanmah made of rubber, as an example. If they haven't got the one you want which is most unlikely; then they will make one for you. www.polyflex.com.au and info@polyflex.com.au will help you with information and I can highly recommend their service and products.

Regards

Peter
__________________
Bedouin is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shaft Log Hose Calliste Repairs & Maintenance 1 07-17-2010 02:29 AM
Maincraft Shaft Seal jacquiee Repairs & Maintenance 6 08-09-2009 02:32 AM

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


All times are GMT. The time now is 09:43 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0
×