Go Back   Cruiser Log World Cruising & Sailing Forums > Cruising Forums > Living Aboard
Cruiser Wiki Click Here to Login

Join Cruiser Log Today

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-24-2016, 04:45 AM   #43
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Safe at anchor near Montys marina, Caboolture River.
Attached Images
File Type: jpg montys.jpg (106.1 KB, 4 views)
__________________

__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-24-2016, 06:07 AM   #44
Moderator
 
delatbabel's Avatar
 
Join Date: Jul 2007
Posts: 698
Send a message via AIM to delatbabel
Default

Quote:
Originally Posted by haiqu View Post
It all has to do with my anchor winch, which had to be bolted to the anchor locker lid because there was no place else for it to go. But even though I reinforced the lid there was a distinct possibility that while anchoring a drifting yacht could yank the lid - winch and all - into the water. I really needed to solve that.
You should never have your anchor winch taking the weight of the chain while you're at anchor. That's not what they are designed for.

Did you see my setup? I'm not sure if I ever anchored with you on board, perhaps once in NZ somewhere. I have a nylon line that I run between 2 of the samson posts amidships. From the middle of that line runs another nylon line forwards with one of those rubber tension / shock absorbers in it, and a chain grabber hook that hooks onto the chain (hence the name). After hooking the chain I release the tension on the anchor winch and the weight of anchor and chain is now supported by the samson posts. The anchor winch is still there as a fallback should the nylon fail.

What you're doing sounds similar but you should consider a permanent solution. I believe that it's better to use nylon because it stretches a bit and has a high breaking load (spectra would be higher but doesn't have the stretch so it can't work as a shock absorber).
__________________

__________________
= New South Wales, Queensland,
delatbabel is offline   Reply With Quote
Old 06-24-2016, 09:55 AM   #45
GOF
 
Join Date: Mar 2010
Home Port: Mandurah
Vessel Name: Stand Easy and now Eleuthera as well
Posts: 119
Default

Good to hear you made it okay. And with a minimum of disasters. Did you enjoy the first trip
__________________
Oldsquizzy is offline   Reply With Quote
Old 06-24-2016, 11:37 AM   #46
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Quote:
Originally Posted by delatbabel View Post
You should never have your anchor winch taking the weight of the chain while you're at anchor. That's not what they are designed for.
I think you missed the point of the issue I was solving. Yes, the chain is tied off to a steel post at anchor, but there's a finite time - several minutes in fact - where all that's holding the yacht is a combination of feeble muscles and the winch. In that situation a drift could have yanked the whole winch and locker lid into the water.

I try to only anchor at slack tides but there may be occasions where doing otherwise is unavoidable. This is all a lot easier if you have a reliable diesel that will purr away and match the yacht's movement of course, and someone to operate it. Or an electric winch.

Nope, I don't think we ever anchored. What you've described sounds like a fancy kind of snubbing line.
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-24-2016, 11:41 AM   #47
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Quote:
Originally Posted by Oldsquizzy View Post
Good to hear you made it okay. And with a minimum of disasters. Did you enjoy the first trip
Haven't felt so alive in years mate. I just spent the past 30 minutes fending off a houseboat that has 25 metres of chain out (in a 40 metre wide river) and more windage that the Queen Mary. In gusts of 50 kt.

I'd say "in the rain" too (who was the author who used that line?) but I'd be lying.
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-24-2016, 12:00 PM   #48
Lieutenant
 
Join Date: Oct 2012
Home Port: Portsmouth
Vessel Name: No Worries
Posts: 79
Default

Well done for overcoming all the problems and getting where you wanted too
__________________
steve_h is offline   Reply With Quote
Old 06-25-2016, 12:12 AM   #49
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Cheers Steve. But it goes to show that even with the most careful planning some small detail can ruin everything. I had a mud map, I knew that I had to go to port of the last yellow sign, and yet it somehow slipped my memory at the end of the journey. If I'd made that sort of mistake in a light plane I'd be dead. In anything but a bilge keeler I'd have lost the yacht.

As I sat there reflecting for 12 hours and waiting for the tide I blamed federal government agencies and local councils for not erecting proper signage, cursed Alan Lucas for not having any details of the Caboolture River in his book "Cruising the Coral Coast" and generally behaved like an utter prat for the first couple of hours. Then it dawned on me what responsibility actually means with respect to being the captain of a vessel. It means eating all that and still getting to the destination regardless.

A sobering experience. I don't deserve the title "skipper" just yet, but I can see it from here.
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-25-2016, 12:34 AM   #50
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Here's a copy of the "mud map" referenced above. Official title is hydrographic survey C7-318-1 (Qld). It shows the two miles of the river directly behind the suburb of Beachmere. I went to starboard of shoaling sign No. 5 (top left).

As you can see, large sections of river have no depth at all at low water, and in fact are bare mudflats. Not what you'd call the easiest first journey.

I'm also very glad I decided to drop anchor at 11pm after floating off rather than continuing in the dark. The last mile is an obstacle course of moored boats, crab pots and mad teenagers in aluminium runabouts without lights.
Attached Images
File Type: jpg mudmap.jpg (92.4 KB, 2 views)
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-25-2016, 02:52 AM   #51
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

For Del - just finished scrubbing the fur off the chain then took a photo of the winch and anchor locker lid. The lid was reinforced underneath when I bolted the winch down, and the reinforcement acts against the locker frame. But as you can see there was nothing holding the lid down until I added the small safety chain.

Note also anchor chain is wound around the Samson post.
Attached Images
File Type: jpg winch.jpg (101.2 KB, 5 views)
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-25-2016, 10:28 PM   #52
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Some journey stats (yeah, I know I'm making a big deal out of nothing but I'll be on the hard now for months):

Distance: 30 nmi
Avg speed: 3 kt
Time taken: 2 days
Total running hours: 11
Night hours: 2
Engine: 6hp Mercury ME6ML (2-cyl 2-str, rebadged Tohatsu)
Fuel used: 25 litres, 92 octane w/ 50:1 oil mix
Economy: 2.3 litres/hr
Attached Images
File Type: jpg route.jpg (102.0 KB, 1 views)
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-25-2016, 10:40 PM   #53
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

It takes a lot to surprise me these days. Yeah, I saw a pod of dolphins as I came around the point at Scarborough on Wednesday, yawnies. But Friday morning I was fast asleep and a tiny blue bird flew through the open hatch above my head and landed on the bunk. I opened my eyes and it flew out the companionway, stopping briefly to take another look inside. Now that surprised me.

This morning the bow looked like an aviary.
Attached Images
File Type: jpg birds.jpg (99.7 KB, 3 views)
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-26-2016, 06:58 AM   #54
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Picked up the van today, but Sunday was a bad choice. No buses from the marina and the service I wanted to use from the city wasn't running either, so I did a fair bit of hitchhiking and walking. At least I'm finished the move and can go shopping at leisure too.
__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Old 06-26-2016, 03:48 PM   #55
GOF
 
Join Date: Mar 2010
Home Port: Mandurah
Vessel Name: Stand Easy and now Eleuthera as well
Posts: 119
Default

So you are going to be there for a while? When is haul out day?
__________________
Oldsquizzy is offline   Reply With Quote
Old 06-27-2016, 01:24 AM   #56
Admiral
 
haiqu's Avatar
 
Join Date: May 2011
Home Port: Brisbane
Vessel Name: Keppelena
Posts: 1,519
Default

Haulout day is July 5th unless they can do it earlier. The MSQ order wants me out before the end of June but that may not be possible. I expect to be here up to six months, and will also need to go to Sydney in the meanwhile to attend to Keppelena.
__________________

__________________
"The cure for anything is salt water... sweat, tears, or the sea" -- Isak Dinesen

I've Contributed to the Cruisers Wiki: All sections
haiqu is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


All times are GMT. The time now is 09:53 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0