Go Back   Cruiser Log World Cruising & Sailing Forums > Cruising Forums > The Bosun's Locker > Other Equipment
Cruiser Wiki Click Here to Login

Join Cruiser Log Today

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-28-2008, 02:28 PM   #1
Ensign
 
Join Date: May 2008
Posts: 15
Default

Hi guys, me again.

I'm confused! An experienced sailor told me to buy a proper joining link and it was ok to join two 20 metre lengths of 8mm anchor chain I have. Then another experienced sailor told me not to! He said under no circumstances must I ever join chain!

I have a welder and can seal the link properly, but what is the overall opinion?

Many thanks in advance for replies.
__________________

__________________


harpoon71 is offline   Reply With Quote
Old 06-28-2008, 09:22 PM   #2
Lieutenant
 
Join Date: Sep 2004
Posts: 81
Default

I can tell you that Evan Starzinger joins chain - 2 circumnavs and Beth is well respected writer on cruising, so they must know SOMETHING.

My big problem is that I use G4 chain and all the joining links are lesser strength.
__________________

__________________
Charlie Jones is offline   Reply With Quote
Old 06-28-2008, 09:55 PM   #3
Retired Mod
 
Lighthouse's Avatar
 
Join Date: Mar 2007
Home Port: Durban
Posts: 2,984
Default

@harpoon71

Using a commercially available "chain joiner" is OK (I say OK because I personally think that this could be a possible weak link), but welding a link, as you suggest, would burn off the galvanising and cause rapid decay in that area.

IMHO.
__________________


The World Cruising & Sailing Wiki

Help to build this free, online World Cruising Guide.

"Built by cruisers, for cruisers''

I've Contributed to the Cruisers Wiki: Most sections
Lighthouse is offline   Reply With Quote
Old 06-28-2008, 10:00 PM   #4
Admiral
 
MMNETSEA's Avatar
 
Join Date: Oct 2004
Posts: 3,067
Default

Hi,

If you check this LINK go to page 1395 and you will find this advice :-

Click image for larger version

Name:	chain_connectors.jpg
Views:	117
Size:	62.5 KB
ID:	513

You can weld in a link - provided that you use the Identical Steel Alloy in the welding rod as the chain contains. Remember to paint the weld with a zinc rich paint and check it frequently,

alternatively have the welded chain hot galvanized dipped.

P.S. Another alternative is to use a Chain Shackle pictured here from McMaster, it will probably NOT go through your windlass gypsy, but it could be lifted off the gypsy with a chain hook when the connecting shackle arrives at the gypsy. These shackles are designed to connect the chain to the anchor, therefore OK for connecting chain together.


Name:   Chain_Shackle.gif
Views: 87
Size:  12.0 KB
__________________
MMNETSEA is offline   Reply With Quote
Old 06-29-2008, 08:54 AM   #5
Ensign
 
Join Date: May 2008
Posts: 15
Default

Thanks for that advice guys.

I'm glad you all leaned towards "It's ok if done properly!" because I'm skint and I already have 2 lengths of 20 metre chain, one of those bash-it-with-a-hammer chain joiners, a welder and some decent zinc primer.

So I'll weld the link for extra security, then cover with the primer.

And ..... yes for sure I'll keep a good eye on it, in fact everytime I bring up the chain!

Thanks again.
__________________


harpoon71 is offline   Reply With Quote
Old 06-29-2008, 09:22 AM   #6
Admiral
 
MMNETSEA's Avatar
 
Join Date: Oct 2004
Posts: 3,067
Default

Before you weld up one of " those bash-it-with-a-hammer chain joiners" please confirm that it is not one of these - see 
Name:   Linkss.jpg
Views: 93
Size:  16.8 KB

If it is one of these - they not for lifting - they are probably drop forged. If it is welded it could become very brittle and would therefore require the temper to be drawn - if not it could break at the wrong moment.

If it is one of those links in the picture - it would be better to cut and use one of the existing chain links to join the chain,then weld it closed.
__________________
MMNETSEA is offline   Reply With Quote
Old 07-02-2008, 09:05 AM   #7
Admiral
 
Auzzee's Avatar
 
Join Date: Jan 2005
Home Port: Darwin
Vessel Name: Sandettie
Posts: 1,917
Default

Hi there, I have used the 'bash-it-with-a-hammer' joiner with great success. I still have the 8mm short link chain I used on my 36'er in 1987. That boat swung on the pick for four year in an area with 7 metre tides. The joiner link showed no more wear than other links on the chain. However, the quality of galvanising is not as good as that used on good chain. and yearly inspection and a touch-up with cold gal and a brush is advised. The spikes/rivets which are hammered flat have never become loose.

Welding should not be necessary.

Cheers

David
__________________
"if at first you don't succeed....Redefine success"!


Auzzee is offline   Reply With Quote
Old 07-04-2008, 06:01 PM   #8
Ensign
 
Join Date: Mar 2008
Posts: 10
Default

I too, have used bash-with-hammer joiners with good success. A couple of years ago, I was in a 50 kt blow and my ABI stainless bridle plate (said to be usable as a chain hook and in use as such) at the end of a 30 foot length of 1-inch 3-strand nylon snubber, bent open and let the chain go (what a bang that made!), but the joiner links in the chain were not affected at all. I guess it all depends on where you want to put the "weak" link - there is always one somewhere . . .
__________________
KG4JXT is offline   Reply With Quote
Old 07-21-2008, 01:51 PM   #9
Lieutenant
 
Join Date: Sep 2004
Posts: 81
Default

Quote:
Originally Posted by KG4JXT View Post
I too, have used bash-with-hammer joiners with good success.
Now if I could just find one of those to match my G4 chain. Seems a bit silly to me to join G4 with a G3 chain joiner, and no one seems to make one rated as G4.
__________________
Charlie Jones is offline   Reply With Quote
Old 07-21-2008, 10:11 PM   #10
Admiral
 
MMNETSEA's Avatar
 
Join Date: Oct 2004
Posts: 3,067
Default

Hi Charlie,

Have a look at these connectors - they Meet ASTM A-952-96 standards for Grade 100 chain fittings. # Forged Alloy Steel - Quenched and Tempered. # Fatigue rated.

They are rated stronger than G4.

Click on CROSBY
__________________
MMNETSEA is offline   Reply With Quote
Old 07-22-2008, 01:03 PM   #11
Lieutenant
 
Join Date: Sep 2004
Posts: 81
Default

Quote:
Originally Posted by MMNETSEA View Post
Hi Charlie,

Have a look at these connectors - they Meet ASTM A-952-96 standards for Grade 100 chain fittings. # Forged Alloy Steel - Quenched and Tempered. # Fatigue rated.

They are rated stronger than G4.

Click on CROSBY
Thanks- Perhaps I should be more specific We sail a Meridian 25 and use 1/4 G4 chain. I can find G4 connectors in larger sizes, but not in 1/4. The connector they show has a working load of 1325 pounds. The G4 chain I'm using has a SWL of 2600- about double the SWL of the connectors I find in 1/4. And therein lies the problem. Although they do state that "Ultimate load is 4 times SWL" so it would most likely be fine.
__________________
Charlie Jones is offline   Reply With Quote
Old 01-27-2009, 11:18 PM   #12
Ensign
 
Join Date: Jun 2005
Posts: 1
Default

FYI, seems I saw a G6 1/4 link, part no.: 1014397 on page A336.
__________________

__________________
In Florida
George is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Think Your Boat Is Safe At Anchor In The B V I ? Lighthouse General Cruising Forum 8 05-21-2011 06:34 PM
I Want To Join Workers Sailboat transegypt Crew Positions Wanted 2 04-28-2011 07:54 AM
Pineapple Arrived Safe MMNETSEA Overdue & Distress Reports 3 01-24-2011 07:40 PM
Running Off To Join The Circus........ duckwheat General Cruising Forum 5 05-24-2007 03:39 PM

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


All times are GMT. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0
×